 |
|
|
|
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
TOP COATS
 |
 AquaGard™ is a water-based, non-yellowing varnish that provides a furniture quality finish. Rub between coats for a piano-like finish. Chemically resistant for interior and exterior applications. Available in Gloss, Satin, Dull, and Clear-Flat. |
 |
 ColorSeal™ is a clear, anti-yellowing topcoat for sealing glazes, sensitive color work, and most everything else. It will not pull off color. ColorSeal™ can be used as a barrier coat and the first step when building a durable protective finish over delicate artwork.
|
 |
 AquaSeal™ is a super-clear seal coat that turns any flat latex paint coat into an exceptional basecoat for decorative finishing. Sealing with AquaSeal™ gives more open time for glazing. AquaSeal™ also be used over walls for a clear, durable satin topcoat. Available in pints, quarts, half gallons, and gallons. |
 |
 AquaThane™ is a co-polymer urethane designed for a tough, hard, anti-yellowing finish coat. Use on cabinets, floors, tabletops—anywhere a superior, tough, chemical resistant surface is required. This product is appropriate for interior and exterior applications. Available in Gloss, Satin, and Dull. |
 |
 Varnish Plus™ is a water-based pre-catalyzed conversion varnish with high standards of durability in an easy to use spray or brush-on formulation. Varnish Plus™ clear finish promotes excellent flow-out and tough film formation. Varnish Plus™ meets or exceeds all standards as set forth in the furniture, kitchen cabinet, and Millwork Association for US Standards.
|
 |
 C-500 Super Urethane Top Coat is a commercial quality, water-based, clear topcoat manufactured by Faux Effects Available in Gloss, Satin, or Dull sheens in a variety of sizes. |
 |
 Aqua Finishing Paste™ is a clear, easy-to-use topcoat paste made for Stain & Seal™, but it serves as a general topcoat as well. Apply as many layers as you desire with cheesecloth and buff in between coats for a hard, satin finish coat. Sold in quarts and gallons. |
 |
 AquaWax™ is a finishing material that creates tetures reminiscent of an Old World wax-coated wall, both in look and feel. Just rub or trowel on and buff. May be tinted with AquaColor™. AquaWax™ is an excellent product for sophisticated stenciling and can be painted over without removing. Sold in pints, quarts and gallons. |
for use in water-wet conditions or where maximum durability is desired. C-500 Urethane™ is pre-catalyzed so there is no messy mixing or measuring required. This product bonds and seals so completely it can be used for water fountain areas, decorative sink bowls, vanities, and kitchen counter tops. 
 |
For pricing information, please call 913-888-9996 |